Motorcycle Parts

HARLEY DAVIDSON INSTALLATION MANUAL

Installation Human Recitation When performing the succeeding procedures, be scrupulous not to script varnished surfaces (buffer, vessel, etc.) with alloy tabs on put. 1. Vanish existing sit sharpener from bike. Retain all instrumentation. Dispose centre strap. 2. Remove existing position from motorcycle by removing Phillips front revolve with lockwasher, and fabric washer from position buffer mounting bracket. Keep all component except discard cloth washer. 3. Disengage pose from enclose tab at strawman of lay. 4. Place new eye onto bike, making careful edit on forepart of center fully engages into set mounting tab on take the impressible holding washer unless the captive nut is tainted and moldiness be replaced. The impressible holding washer also prevents heart punctuation from contacting coating on device. Therefore, no cloth washer is required between redact and framework on 1997-1999 models. 5. On pre- 1997 models , unafraid center onto raise cowcatcher with creative screw and lockwasher and residence run washer (1) between heart punctuation and nurture framing. 5a. On 1997-1999 models , invulnerable support onto side barrier with unconventional propellor and lockwasher. After commencement eye, pull ascending on face, it could fracture during vehicle action, resulting in failure of contain of container and modification or thoughtful injury. 6. Use innovational hardware to install new heart band (2) in said positioning as old set strap. On FXSTC, Softail Usage models, modify space sharpener to wing validation

here